List Of Esc/Vp21 Commands; Command List; Usb Connection - Epson EMP-760 User Manual

List of ESC/VP21 Commands

Command List

When a power on command is sent to the projector, the power will turn on
and the projector will change to warm-up mode. When the power has
turned on, a colon ":" (3Ah) will be returned.
When the projector executes a command, it returns a ":" and waits for the
next command to be sent.
If command processing terminates with an error, the projector outputs an
error message and then returns the ":" code.
Item
ON
Power ON/OFF
OFF
Computer (Auto)
Computer
Component Video
Signal selection
Video
S-Video
EasyMP
ON
A/V Mute ON/OFF
OFF
Black
A/V Mute Selection Blue
User's Logo
* When issuing any of the above commands, tack a Carriage Return (CR)
code (0Dh) on to the end.
Command
PWR ON
PWR OFF
SOURCE 1F
SOURCE 11
SOURCE 14
SOURCE 41
SOURCE 42
(EMP-765 only)
SOURCE 50
MUTE ON
MUTE OFF
MSEL 00
MSEL 01
MSEL 02

USB connection

Connector shape: USB (type B)
• • • •
<At projector>
(type B)
*The [USB Type A] port (EMP-765 only) cannot be used as a USB hub.
User's Guide
113
<At computer>