Turning The Projector On; Connecting The Power Cable - Epson EMP-760 User Manual

Turning the Projector On

Turn the power on to start projecting images.
CAUTION
Make sure you to read the separate Safety Instructions/World-Wide
Warranty Terms before projecting images.

Connecting the Power Cable

TIP
When the "Extended" - "Operation" - "Direct Power ON" menu item
is set to "ON", a confirmation buzzer sounds and the projector's
power turns on as soon as the power plug is inserted into the electrical
outlet, and projection will start.
The power for the equipment that is connected to the projector should
be turned on beforehand.
PROCEDURE
Check that the power is turned off for the projector
1
and all components connected to the projector.
Connect the computer or other video source to the
2
projector. sp.20,
Remove the lens cover.
3
Hold the lens cover by the knob in the middle of the cover and
remove it.
sp.65
p.24
Connect the accessory power cable to the projector.
4
Check that the power cable connector is facing the same way as
the power inlet on the projector, and then insert the power cable
connector securely into the projector.
Connect the other end of the power cable to an
5
earthed electrical outlet.
The Power indicator will light orange.
Lit orange
User's Guide
35