Operation Button Lock Function - Epson EMP-760 User Manual

Functions for Enhancing Projection

Operation Button Lock Function

This function locks the buttons on the projector's control panel.
This function is useful at times such as during show events so that only
projection is carried out deactivating all buttons operation, or in places
such as schools to limit the range of buttons that can be operated.
PROCEDURE
Press the [Menu] button on either the remote control
1
or the projector's control panel, and then select
"Setting" - "Operation Lock" from the configuration
menu.
Set to "ON".
2
If set to "ON", none of the buttons on the control panel except
the [Power] button can be operated.
When the confirmation message is displayed, select
3
"Yes".
The control panel buttons will be locked in accordance with the
selected setting.
TIP
There are two methods to cancel the projector's control panel lock.
• Using remote control, change the "Setting" - "Operation Lock" in
the configuration menu to "OFF" .
• Hold down the projector's [Enter] button continuously for about 7
seconds, a message will be displayed and the lock will be cancelled.
User's Guide
54