Kenmore 385.15212 Owner's Manual page 80

,_ Mark forplacement of buttonhole
@ Starting point
(_ Slider
(_ There should be no gap
(_ Spring holder
(_ Difference
[]
Draw both threads to the left under the foot.
Insert the garment under the foot, and lower the needle
into the fabric to the starting point,,
Then lower the automatic buttonhole foot
Depress the foot control to sew a buttonhole,
[] Remove the fabric and place a pin just before the
bartack at each end, to prevent cutting bartacks, Cut the
opening with the buttonhole opener
[]
f
[]
®
J
-,%
[_To repeat buttonhole sewing, turn the stitch selector to
, then back to _] again, as shown,
Now, simply step on the foot control to sew an identical
buttonhole
[] When finished, push the buttonhole lever up as far as it
will go,
f
[]
[]
P_'_ERN
j,
68