Resetting The Lamp Illumination Time - Epson EMP 5600 Owner's Manual

5
Attaching the lamp cover.
First attach the hook on the left side of the lamp cover, and then the right. Snap the cover
into place and secure with the screw.
Point
· Attach the lamp and lamp cover firmly. The power will not be reinstated unless the lamp
and lamp cover are set firmly in place.
· A replacement Air Filter is packaged with the replacement lamp. Replace the Air Filter at
the same time as replacing the lamp.
· Ensure that the lamp illumination time is reset in accordance with the following procedure
after the lamp has been replaced with a new one.

Resetting the lamp illumination time

1
Press the [Help] button for five or more consecutive seconds.
The screen for resetting the lamp's illumination time will be displayed after the help menu
has been displayed.
Power Computer Video
A/V mute
Resize
Shift
2
Select [Yes]
Press the [Tracking +, -] on the main unit (lower the [Enter] button on the remote control
unit) and select [Yes].
3
Execution
Press the [
unit to execute the process.
Menu Sync Esc Help
Tracking Tracking
Keystone
Volume Sync
Reset Lamp ON Time
Do you reset the Lamp ON Time?
Yes
:Select :Execute
(Enter)] button on the main unit or the [Enter] button on the remote control
Help
Help
No
Esc
Menu Help
Comp1 Comp2/BNC
Video
Auto Resize
P in P Preset
- Volume +
Replacing the Lamp - 89