Resetting The Lamp Operating Time - Epson EMP-810 User Manual

Maintenance

Resetting the Lamp Operating Time

The projector has a built-in counter which keeps track of the lamp operating
time. When the cumulative operating time reaches a certain point, it causes the
replacement warning message to be displayed. Therefore, the counter needs to
be reset after the lamp has been replaced with a new one. You can do this using
the projector menu.
Procedure
1 Press the [Menu] button on either
the remote control or the
projector's control panel.
The Main menu will be displayed.
2 Select Reset Lamp Timer from the
About menu and then press the
button.
3 Select Yes and then press the
button.
The lamp operating time will then be
reset.
Tip :
Do not reset the lamp operating time except after the lamp has been replaced, otherwise
the lamp replacement period will not be indicated correctly.
Downloaded from ProjectorsManual.com Manuals
96
Computer/YCbCr Video
Menu
Source
Menu Esc
Comp1
Sync+
Tracking - Tracking +
Auto
Video
Projector
Remote control
Help
Comp2/YCbCr
Source
S-Video