Connecting External Audio Equipment - Epson EMP 5600 Owner's Manual

Connecting external audio equipment

It is possible to enjoy dynamic sound by connecting the Audio Out port on the projector to a
PA system, an active speaker system, or other speakers equipped with built-in amplifiers.
External audio equipment
Use audio connection cables available on the open market (pin plug <--> 3.5mm stereo mini-
jack plug).
Point
· The sound is output externally when the stereo mini-jack is inserted into the Audio Out
port. Sound will not be output from the projector's speakers when this connection is
made.
· The sound on the images being projected will be output.
· Purchase an audio connection cable that matches up with the connector on the external
audio equipment to be used.
34 - Connecting the projector to a computer
Audio connection cable (available on the open market)
Audio Out port