Epson EMP 5600 Owner's Manual page 72

Top Sub Menu
Menu
Set- Sleep Mode
ting
Reset
User's Execute
Logo
Adva Language
nced
Startup Screen
Color Setting
70 - Menu Operations
Sets the energy-saving function for when no image signals
are being input. When this is set at [ON], projection will be
automatically ended and the projector will enter the sleep
mode if no image signals are input and no operations are
performed for a period of thirty minutes (the operation indi-
cator will be illuminated in orange).
Press the [Power] button to restart projection.
Returns all setting menu adjustment values to the default
values.
Press the [Enter] button and then select [Yes] on the confir-
mation screen displayed.
· Select [Reset All] to return all image and sound values to
the default settings. (see page 71)
Registers user logos. (see page 72)
Press the [Enter] button and follow the instructions dis-
played on the confirmation screen.
· The saving procedure requires a certain amount of time to
complete. Do not attempt to operate the projector or the
equipment connected to the projector while this procedure
is running. Failure to observe this may result in damage.
· The size that can be registered is 400 x 300 dots.
· The display size will be adjusted when video images are
being projected.
Sets the language with which messages are to be displayed.
Press the [Enter] button and select the required language
from the language selection menu displayed.
Displays the user logo during warm-up after the power has
been switched on.
· The user logo must be registered and set up before it can be
amended.
Adjusts the color temperature of the image.
Absolute color temperature: Sets the color temperature.
RGB: Sets the strength of the RGB colors (red, green and
blue.)
Press the [Enter] key to display the color setup menu, select
the R, G and B items, and then set the required value.
· Set the color temperature value to the yardstick value.
Function Default Value
ON
-
EPSON'S logos
English
ON
Absolute color
temperature
7500K