Resetting The Lamp Operating Time - Epson EMP-1815 User Manual

Replacing Consumables
E
Install the new lamp.
Insert the new lamp along the guide rail in the correct direction so
that it fits in place, push it down firmly, and once it is fully inserted
tighten the two screws.
Downloaded from ProjectorsManual.com Manuals
F
Replace the lamp cover.
Attention
• Make sure you install the lamp securely. If the lamp cover is
removed, the lamp turns off automatically as a safety precaution.
If the lamp or the lamp cover is not installed correctly, the lamp
does not turn on.
• This product includes a lamp component that contains mercury
(Hg). Please consult your local regulations regarding disposal or
recycling. Do not dispose of it with normal waste.

Resetting the lamp operating time

f
The projector records how long the lamp is turned on and a message and
indicator notify you when it is time to replace the lamp. After replacing
the lamp, make sure you reset the lamp hours from the configuration
menu. s p.58
Only reset the lamp operating time after the lamp has been
q
replaced, otherwise the lamp replacement period is not
indicated correctly.
77