Connecting The Video Equipment; In The Case Of Composite Image Signals; In The Case Of S Image Signals - Epson EMP 5600 Owner's Manual

I I I I Connecting the video equipment
Switch off the power supply to the projector and video equipment prior to attempting to
make the connection.

In the case of composite image signals

· Connect the projector's Video Port to the video equipment with the supplied RCA Video
Cable (Yellow).
· Connect the L-Audio2-R ports with the RCA audio cable supplied (red/white) to output
sound from the projector's speakers.
To the audio output port L (white)
To the audio output port R (red)

In the case of S image signals

· Connect the projector's S-Video Port to the video equipment with the S-Video cable (available
on the open market).
· Connect the L-Audio2-R ports with the RCA audio cable supplied (red/white) to output
sound from the projector's speakers.
To the audio output port L (white)
To the audio output port R (red)
Video Port (Yellow)
To the video output port
(yellow)
RCA Video Cable
RCA Audio Cable (supplied with the projector)
To the S-Video output port
S-Video cable
(available on the open market)
RCA Audio Cable (supplied with the projector)
Audio Port (White)
Audio Port (Red)
Audio Port L (White)
Audio Port R (Red)
S-Video Port

Connecting the video equipment - 37