Epson EMP 5600 Owner's Manual page 45

2
Select the Port to which the connection has been made when more than one item of
equipment has been connected.
Press the port button connected to the computer or video equipment to switch the input
source.
Computer
Power
Computer
A/V mute
Resize
Video
Connected
Port
Computer #1 Port
Computer2/
Component Video (RGB)
Computer2/
Component Video (YCbCr)
Computer2/
Component Video (YPbPr)
Video Port
S-Video Port
Point
· Even if there is a physical connection, the system will automatically switch to the state
used immediately before power-off if there is no input signal, or if the connected equip-
ment is not outputting a signal.
· The Computer #2/Component Video port sources that are switched with the [Computer]
and [Video] keys on the projector and the [Comp2/YCbCr] key on the remote control will
only display either the Computer2 (RGB) Computer2 (YCbCr) or the Computer2 (YCbCr)
depending on the Computer2 setting. (see page 69)
Video Menu Sync Esc Help
Tracking Tracking
Keystone
Volume
Shift Sync
Button to Select
Main Unit
[Computer]
(will change whenever
pressed)
[Video]
(will change whenever
pressed)
Esc
Menu Help
Comp1 Comp2/YCbCr
Comp1
Video
Auto Resize
P in P Preset
- Volume +
Remote Control
[Comp1]
[Comp2/ YCbCr]
[Video]
(will change whenever
pressed)
Comp2/YCbCr
Video
Display at the top
right-hand corner of
the screen
Computer1
Computer2 (RGB)
Computer2 (YCbCr)
Computer2 (YPbPr)
Video
S-Video
Projection - 43