This section provides explanations on potential problems and the methods of taking care of
them.
I I I I Troubleshooting
When you think you have a problem, first of all check the Indicators on the projector.
The projector is fitted with Operation Indicator, Lamp Indicator and Temperature Indicator to
advise the projector's status.
Operation Indicator
Indicator Status
Illuminated in
Orange
Blinking in Orange
Illuminated in Green
74 - Troubleshooting
Troubleshooting
Cause
Stand-by status
Cool-down proce-
dure in progress
Projection in
progress
Power
Computer
A/V mute
Resize
Recovery or Status
(Not an error)
Projection will be started when the [Power]
button is pressed.
(Not an error)
· Wait for a moment. The acount of time for the
projector to cool down (cooling the lamp) will
depend on the external temperature, etc.
· The [Power] button cannot be used during
the cool-down period. This will be
illuminated in orange once the cool-down
process has been completed, so press the
button once more then.
(Not an error)
Operation Indicator
Lamp Indicator
Temperature Indicator
Reference
Page
42
49
42