Commencing Projection - Epson EMP 5600 Owner's Manual

4
Plug the Power Plug into the power socket.
The Operation Indicator will be illuminated in orange.

Commencing projection

1
Press the [Power] button to turn on the power supply.
The Operation Indicator will begin to blink in green, and projection will be started.
Power
Power
The Operation Indicator will change from blinking to being steadily illuminated in green
after a while.
Point
Button operations are not possible when the Operation Indicator is blinking in green.
42 - Projection
Operation Indicator
Computer Video Menu Sync Esc
A/V mute
Tracking
Resize Keystone
Shift Volume Sync
A message stating (No image
signals input) will be dis-
played when no image sig-
nals have been input.
(Depending on the no-signal
setting, this message may not
be displayed.) (see page 69)
Power Computer
A/V mute
Resize
Illuminated in orange
Help
Power
Tracking
Set the R/C ON OFF switch to [ON] first of all
when using the remote control unit
Blinking in green → Illuminated
Power
Freeze
A/V Mute
R/C ON
E-Zoom
OFF
3
Enter
Esc
Operation Indicator
Power Computer
A/V mute
Resize