Epson EMP 5600 Owner's Manual page 32

G When the monitor port is the 5BNC
Point
· Do not bind the Power Cable and the Computer Cable together. Failure to observe this
may result in video noise and malfunctions.
· An adapter may be required when making the connection depending on the stand of the
computer's port. Refer to the computer instruction manual for further details.
· There are cases where the optional Mac Desktop Adapter (ELPAP01) is required when
connecting up to a Macintosh.
· It is possible to establish connections with both the Computer #1 Port and the Computer
#2 Port when two computers are to be connected.
G When the monitor port is 13w3
The Computer #1 Port is also connected to the D-Sub 15 port with the use of the conversion
cable when the 13w3 port is used for connecting the computer's monitor port to a work station.
· The projector's computer #1 mini d-Sub 15 Port is connected to the computer's monitor port
(13w3) with the 13w3 ↔D-Sub 15 cable (available on the open market).
· Set the switch to the analog setting (left-hand side) with the tip of a ballpoint pen or other
pointed object.
30 - Connecting the projector to a computer
Monitor port
(video port)
Computer Cable
(optional : ELPKC11)
Monitor port
13w3 Cable
(available on the open market)
Computer #1 mini D-Sub15 Port
Computer #1 mini D-Sub15 Port