Resizing Originals By Entering A Scaling Value - Canon imagePROGRAF iPF750 MFP M40 User Manual

10.
Select and click a roll paper in the
11.
Make sure the width of the loaded roll is displayed in the
Note
• If the width of the roll loaded in the printer is not shown in
mation on the Main pane to update the printer information.
12.
C
Make sure the Page Size setting matches the original size as selected in
dialog box—in this case, ISO A4.
13.
D
Select the Enlarged/Reduced Printing check box.
14.
F
Click Fit Roll Paper Width.
15.
Confirm the print settings, and then click
Note
• For tips on confirming print settings, see " Confirming Print Settings(Mac OS X)

Resizing Originals by Entering a Scaling Value

You can freely adjust the size of originals by enlarging or reducing them as desired.
• Enlarged/Reduced Printing
Enlarge or reduce the original in the printer driver, as desired.
iPF750
Enhanced Printing Options
A
Paper Source list.
B
Roll Width list—in this case, 16 in. (406.4mm).
M
Print to start printing.
> Printing enlargements or reductions
B L
Roll Width, click Printer Infor-
C
Paper Size in the Page Attributes
→P.436
Resizing Originals by Entering a Scaling Value
>
2
"
81