Canon imagePROGRAF iPF750 MFP M40 User Manual page 395

2.
Move the slider for each item to the left or right to adjust the settings.
Setting
Raster and Shaded/Rendered
Viewports
OLE
Trade-off
3.
Click the OK button.
Merge Control Settings
Use thse settings to merge intersecting lines.
1.
Click the Merge Control below Graphics.
The Device and Document Settings sheet opens and switches to the Merge Control settings.
Setting
Lines Overwrite
iPF750
Use these settings to adjust the balance between print quality, memory consumption,
and the print speed. If set to None, you cannot print raster images. Printing time will
take longer the higher you set the Best setting.
Use these settings to adjust the balance between print quality, memory consumption
and the print speed when printing a OLE object. If set to None, you cannot print
OLE objects. Printing time will take longer the higher you set the Best setting.
Use these settings to lower the print quality by a certain degree if the print job cannot
be completed at the best quality.
Where the lines intersect, the line that is printed last is visible, but the lines below it
are not visible.
Windows Software
Details
Details
> HDI Driver >
3
379
Graphics Settings