Cleaning The Printhead - Canon imagePROGRAF iPF750 MFP M40 User Manual

Maintenance and Consumables
3.
Press the OK button.
The Set./Adj. Menu is displayed.
4.
Press ▲ or ▼ to select Test Print, and then press the OK button.
5.
Press ▲ or ▼ to select Nozzle Check, and then press the OK button.
The printer now prints a test pattern for checking the nozzles.
6.
Check the printing results.
If the horizontal lines are not faint or incomplete, the nozzles are clear.
If some sections of the horizontal lines are faint or incomplete, the nozzles for those colors are clogged.
If horizontal lines are faint or incomplete, follow the steps below and check again for nozzle clogging.
10
1.
Clean the Printhead. (See "Cleaning the Printhead.")
2.
Print a test pattern to check the nozzles.

Cleaning the Printhead

If printing is faint, cleaning the Printhead may improve results.
Choose one of two Printhead cleaning modes ( Head Cleaning A or Head Cleaning B), depending on the problem to re-
solve.
740
• Head Cleaning A
Use this mode if printing is faint or contains foreign substances. This method of cleaning consumes the least amount of
ink.
It takes about three and a half minutes to complete.
• Head Cleaning B
Use this mode if no ink is ejected at all, or if Head Cleaning A does not solve the problem.
It takes about four minutes to complete.
Cleaning the Printhead
> Printheads >
Note
• If the Tab Selection screen is not displayed, press the Menu button.
Note
• If you repeat these steps several times but the horizontal lines are still faint or incomplete, contact
your Canon dealer.
→P.740
iPF750