Top Cover Is Open; Prepare For Parts Replacement; Parts Replacement Time Has Passed; Unknown File - Canon imagePROGRAF iPF750 MFP M40 User Manual

Ipf750 user manual ver.1.40
Hide thumbs Also See for imagePROGRAF iPF750 MFP M40:
Table of Contents

Advertisement

Error Message
>
Other Messages
An error requiring service may have occurred.

Top cover is open.

The printer has detected that the Top Cov-
er is open.

Prepare for parts replacement.

It is almost time to replace consuma-
bles for which service is required.

Parts replacement time has passed.

12
It is past the recommended time to replace consumables for which service
is required.

Unknown file.

Data sent to keep the printer up to date (such as
paper information) is in the wrong format.
832
You have uploaded firmware for a different
model.
Top cover is open.
>
Cause
Cause
Open the Top Cover fully, remove any foreign objects, and close the Top
Cover again.
If the error occurs again, close the Top Cover, turn off the printer, and
wait a while before restoring power.
Cause
You can continue to use the printer for some time until "Parts replacement
time has passed." will be displayed.
Contact your Canon dealer for assistance.
Cause
Cause
Turn off the printer and wait at least three seconds be-
fore restoring the power.
If the message is displayed again, write down the error
code and message, turn off the printer, and contact
your Canon dealer for assistance.
Corrective Action
Corrective Action
Contact your Canon dealer for assistance.
Corrective Action
Check the data. Turn off the printer and wait a while before restor-
ing power, and then resend the data.
Check the firmware version. Turn off the printer and wait a while
before restoring power, and then resend the firmware.
If the message is displayed again, contact your Canon dealer for as-
sistance.
Corrective Action
Corrective Action
iPF750

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Imageprograf ipf750

Table of Contents