Binding Settings Dialog Box - Canon imagePROGRAF iPF750 MFP M40 User Manual

Windows Software >
Fit Roll Paper Width
Specify Folded Size
Rotate Page 90 degrees (Con-
serve Paper)

Binding Settings Dialog Box

This is displayed when you select Binding Settings from the Edit menu. This allows you to configure the binding edge
settings.
3
• Binding Edge
Configures the binding edge when folding paper.
The following settings are available for the binding edge.
Bottom
Top
• Binding
Configures the binding margin (gutter).
286
Prints by creating a binding margin (gutter) of the specified size. Enter the margin size as a number.
Note
• The values that can be entered are 0 to 50 (mm).
• Print Fold Lines
Configures the color and type of fold lines.
Binding Settings Dialog Box
Free Layout >
Setting
Prints by automatically enlarging or reducing the entire document so that the width
of the document matches the roll paper width.
Prints by automatically enlarging or reducing the entire document to match the size
of the paper. Select the actual size of the paper you want to print on in Fit Paper
Size.
Prints by rotating pages by 90 degrees. Pages are automatically rotated if they will fit
within the roll paper width when rotated, and are not rotated if they will not fit with-
in the roll paper width.
Setting
Prints by placing the binding margin (gutter) at the bottom of the document.
Prints by placing the binding margin (gutter) at the top of the document.
Details
Details
iPF750