Cutting Roll Paper After Printing (Mac Os X) - Canon imagePROGRAF iPF750 MFP M40 User Manual

Enhanced Printing Options
8.
Confirm the print settings and print as desired.
Roll paper will be automatically cut after printing.

Cutting Roll Paper After Printing (Mac OS X)

This topic describes how to cut roll paper automatically after printing (using the auto cut function), as well as how to print a
cut line for manual cutting.
2
Note
• The auto cut function is activated on the printer by default and when the printer driver is installed. Follow the
steps below to reactivate the function if it is disabled, or to select the setting for printing a cut line instead.
1.
This sets the
202
Cutting Roll Paper After Printing (Mac OS X)
> Other useful settings >
Note
• For tips on confirming print settings, see " Confirming Print Settings(Windows)
B C
Format for and Paper Size.
Note
• The configuration method varies depending on the OS and application software you are using.
If Page Setup is displayed in the application menu, the settings are configured by opening the Page
Attributes dialog box from Page Setup.
If it is not displayed, the settings are configured in the upper part of the printer driver displayed
when you select Print from the application software menu.
"
→P.212
iPF750