Specifying The Paper Length; Removing The Roll From The Printer - Canon imagePROGRAF iPF750 MFP M40 User Manual

Specifying the Paper Length

When changing the length of paper after the paper has been advanced, specify the length as follows.
Note
• Specify the paper length when you have set ManageRemainRoll to On. (See "Keeping Track of the
Amount of Roll Paper Left.")
1.
On the Tab Selection screen of the Control Panel, press ◀ or ▶ to select the Paper tab (
Note
• If the Tab Selection screen is not displayed, press the Menu button.
2.
Press the OK button.
The Paper Menu is displayed.
3.
Press ▲ or ▼ to select Chg. Paper Size, and then press the OK button.
4.
Press ▲ or ▼ to select Roll Length, and then press the OK button.
5.
Press ▲ or ▼ to select the length of paper loaded in the printer, and then press the OK button.
Specify the roll length as follows.
1.
Press the ◀ or ▶ button to move to the next field for input.
2.
Press the ▲ or ▼ button to enter the value.
3.
Repeat steps 1 and 2 to finish entering the value, and then press the OK button.

Removing the Roll from the Printer

Remove rolls from the printer as follows.
Note
• If you need to cut the roll, see "Specifying the Cutting Method for Rolls."
iPF750
→P.591
Handling Paper > Handling rolls
).
→P.594
Specifying the Paper Length
>
5
585