Zenith PVR5269 Operation Manual & Warranty page 16

PIP OPERATION
OPERATION WITH CABLE DECODER
With your equipment setup in this manner, your television has
the following PIP capabilities:
• Simultaneously view a video tape playing in the VCR and
a basic cable channel selected by the TV's tuner.
• Simultaneously view two different cable channels; one
cable channel selected by the TV's tuner and another
cable channel selected by the cable box.
• Swap the main picture and the PIP inset.
NOTE:
• The cable channels you can view depends on the service
you have purchased from your cable company.
PIP VIEWING OPTIONS
Viewing Two Different
Cable Channels
• Select Ant/Cable 2 as the
Main Source in the Source
Menu.
• Select Video 1 as the PIP
Source in the Source Menu.
i. Select a channel with the
TV's channel selector.
• Turn on PIP inset.
• Select a PIP channel using the
tuner in the Cable Box.
Viewing a Video Tape
and a Cable Channel
• Select Ant/Cable 2 as the
Main Source in the Source
Menu.
• Select Video 1 as the PIP
Source in the Source Menu.
* Select a channel with the
TV's channel selector.
• Turn on PIP inset.
• Play a tape in the VCR and
view it in the PIP inset.
Out from
Cable-TV
Decoder
Cable "IV
Wall Jack
CABLE BOX
I
VCR
PIP Inset source
Connected to the Video 1 In jacks.
Main Picture Source
Connectedto the Antenna/Cable 2 jack.
LOOPOUT ANTENNA ,*ANTENNA
10 li|lltn CABLE
/'
CABLE
LOOP O IT
Option 2: Cable-TV Decoder Connection via Loop Out To VCR.
(Cables are not supplied with television.)
2_3_t_
3--3