Configuration Jumpers; Figure 3. Configuration Jumper Location; Table 2. Configuration Jumper [J1D1] - Intel SE7520AF2 User Manual

Server Board Features

Configuration Jumpers

Table 2. Configuration Jumper [J1D1]

Jumper Name Pins
CMOS Clear 1-2
2-3
Password Clear 5-6
6-7
Recovery Boot 9-10
10-11
Intel® Server Board SE7520AF2 User Guide
J1D1
CMOS
CLEAR
1
BMC Control
2
Force Erase
3
PASSWORD
CLEAR
5
Protect
6
Erase
7
RECOVERY
BOOT
9
Normal Boot
10
Recovery Boot
11

Figure 3. Configuration Jumper Location

What happens at system reset...
BMC Control: These pins should be jumpered for normal operation.
Force Erase: If these pins are jumpered, the CMOS settings will be cleared on the
next reset. These pins should not be jumpered for normal operation.
Protect: These pins should be jumpered for normal operation.
Erase: If these pins are jumpered, administrator and user passwords will be cleared
on the next reset. These pins should not be jumpered for normal operation.
Normal Boot: These pins should be jumpered for normal operation.
Recovery Boot: If these pins are jumpered, the system will attempt to recover the
BIOS by loading the BIOS code into the flash device from a bootable recovery device.
This jumper is typically used when the BIOS has become corrupted. These pins
should not be jumpered for normal operation.
TP00809
5