Date/Timer; Date Format - Kyocera TASKalfa 420i Operation Manual

Date/Timer

Date/Timer settings include:
• Date/Time ...8-47
•

Date Format ...8-47

• Time Zone ...8-48
• Auto Panel Reset ...8-48
• Auto Sleep ...8-49
• Auto Error Clear ...8-49
• Interrupt Clear Timer ...8-50
NOTE:
If user login administration is enabled, you can only change the settings by logging in with
administrator privileges.
Date/Time
Set the date and time for the location where you use the machine. If you perform Send as E-mail, the date and
time set here will be displayed on the header.
CAUTION:
Be sure to set Time Zone before the Date/Time setup.
Use the procedure below to set the date and time.
1
Press the System Menu key.
2
Press [ ], [Date/Timer] and then [Change] of Date/Time.
3
Press [+] or [–] to enter the date and time respectively.
4
Press [OK].
NOTE:
If you try to change the date/time when a trial application (page 8-75) is running, the If you change
Date/Time setting, trial functions will be unavailable. Are you sure? message is displayed. To change the date/
time, press [Yes].
Date Format
Select the display format of year, month, and date. The year is displayed in Western notation.
Use the procedure below to select the date format.
1
Press the System Menu key.
2
Press [ ], [Date/Timer] and then [Change] of Date Format.
3
Select [MM/DD/YYYY], [DD/MM/YYYY], or [YYYY/MM/DD] and press [OK].
OPERATION GUIDE
Default Setting (System Menu)
8
8-47