Kyocera TASKalfa 420i Operation Manual page 127

Selecting the Multi Purpose Tray
Change the paper size and media type.
The available paper sizes and media types are shown in the table below.
Category
Paper Standard
Size Sizes 1
Standard
Sizes 2
Others
Size
Entry
Media Plain (105 g/m
Type Vellum (64 g/m
Color, Prepunched***, Letterhead***,
Thick (91 g/m
* For instructions on how to specify the custom paper sizes (Custom 1 to 4), refer to Adding
a Custom Size and Media Type for Paper to Print on page 8-4.
** The input units can be changed in the System menu.
Refer to Switching Unit of Measurement on page 8-11.
*** For instructions on how to specify the custom paper types 1 to 8, refer to Paper Weight on
page 8-7.
To print on preprinted or prepunched paper or on letterhead, refer to Special Paper
Action on page 8-10.
NOTE:
You can conveniently select in advance the size and type of paper that will be used often and set them
as default (refer to Paper Size and Media Type Setup for Multi Purpose Tray on page 8-6).
OPERATION GUIDE
How to
Item
Select
Choose from
the standard
size.
Choose from
the standard
sizes not
included in
the Standard
Sizes 1.
Choose from
non-standard
sizes and
custom
sizes.
Enter the
size not
included in
the standard
sizes 1 and
2**.
2
or less), Transparency, Rough,
2
or less), Labels, Recycled, Preprinted***, Bond, Cardstock,
2
or more), Envelope, High Quality, Custom 1 to 8***
Sizes
Inch models: Ledger, Legal, Letter, Letter-R,
Statement, 8.5×13.5", Oficio II and Executive
Metric models: A3, B4, A4, A4-R, B5, B5-R,
A5-R, B6, B6-R, A6-R and Folio
Inch models: A3, B4, A4, A4-R, B5, B5-R, A5-R,
B6-R, A6-R, Folio, 8K, 16K and 16K-R
Metric models: Ledger, Legal, Letter, Letter-R,
Statement, 8.5×13.5", Oficio II, Executive, 8K,
16K and 16K-R
ISO B5, Envelope #10 (Commercial #10),
Envelope #9 (Commercial #9), Envelope #6
(Commercial #6 3/4), Envelope Monarch,
Envelope DL, Envelope C5, Envelope C4,
Hagaki, Oufuku Hagaki, Youkei 4, Youkei 2 and
Custom 1 to 4*
Inch models
Horizontal: 5.83 to 17" (in 0.01" increments),
Vertical: 3.86 to 11.69" (in 0.01" increments)
Metric models
Vertical: 98 to 297 mm (in 1 mm increments),
Horizontal: 148 to 432 mm (in 1 mm increments)
Copying Functions
4
4-5