Kyocera TASKalfa 420i Operation Manual page 169

Use the procedure below to send mixed sized originals as a batch.
Ready to send.
Place original.
Mixed Size Originals
Scan all sheets in the document processor,
even if differently sized, then send.
*Up to 30 sheets can be placed in
the document processor for mixed
Place original.
size originals.
Original : ---
Off
Zoom : 100%
---
Paper :
Preview
Add Shortcut
Status
OPERATION GUIDE
Destination
Same Width Different
Width
Cancel OK
08/08/2009 10:10
1
Press the Send key.
2
Place the original into the document processor.
IMPORTANT: When you place originals of different
width, place the top edge of originals to align with the
width guide at the backside. If the originals are placed
unevenly, they may not be scanned correctly.
3
Press [Original/Sending Data Format] and then
[Mixed Sized Originals].
4
Select the combination of originals from
[Same Width] and [Different Width].
5
Press [OK].
6
Specify the destination, and press the Start key to
start sending.
Sending Functions
5
5-9