Copy Settings; Auto Paper Selection - Kyocera TASKalfa 420i Operation Manual

Default Setting (System Menu)

Copy Settings

The following settings are available for copying functions.
• Paper Selection ...8-26
•

Auto Paper Selection ...8-26

• Auto % Priority ...8-27
• Reserve Next Priority ...8-27
• Preset Limit ...8-27
• Quick Setup Registration ...8-28
NOTE:
If user login administration is enabled, you can only change the settings by logging in with
administrator privileges.
Paper Selection
Set the default paper selection. The table below shows the available settings.
Item
Auto
Default Paper Source
Use the procedure below to set the default paper selection.
1
Press the System Menu key.
2
Press [Copy] and [Change] of Paper Selection.
3
Press [Auto] or [Default Paper Source].
4
Press [OK].
5
Move to the copy screen and press the Reset key.
Auto Paper Selection
If [Auto] is selected for Paper Selection, set the paper size selection method when the zoom changes. The table
below shows the available settings.
Item
Most Suitable Size
Same as Original Size
8-26
Automatically select the cassette containing paper in the same size as
originals.
Select paper source set by Default Paper Source (refer to page 8-9).
Select paper based on the current zoom and the size of the original.
Select paper that matches the size of the original, regardless the zoom.
Description
Description
OPERATION GUIDE