Chapter 4 Basic; Basic Paper Settings - Kyocera TASKalfa 420i User Manual

Basic Paper Settings

4-1
4 Basic
In the Basic tab, you can specify the most commonly used printer driver
settings.
The following fundamental tasks can be performed from this tab:
Creating a Custom Page Size
Printing with Custom Size Pages
Printing in Duplex Mode
Printing Collated Documents
The Basic tab contains several settings for the most commonly used printing
tasks.
Print size
This setting sets the size of the area that the printer prints to, regardless of
the actual paper size that is used by the printing system.
Source
This setting specifies the cassette or tray that the printing system draws
paper from. Unless you are using a custom paper type, you can leave it set
to Auto source selection.
Media type
This setting selects the Source based on the types of media that are
specified in the printing system. In general, you can leave it set to Auto
media selection.
on page 4-3
on page 4-3
on page 4-4
on page 4-5
User Guide