Integrated Peripherals - Gigabyte GA-E240N User Manual

Manual

Hide thumbs

Table Of Contents

Table of Contents

& First/Second/Third Boot Device

Specifies the boot order from the available devices. Use the up or down arrow key to select a device and

press <Enter> to accept. Options are: LS120, Hard Disk, CDROM, ZIP, USB-FDD, USB-ZIP, USB-CDROM,

USB-HDD, Legacy LAN, Disabled.

& Password Check

Specifies whether a password is required every time the system boots, or only when you enter BIOS Setup.

After configuring this item, set the password(s) under the Set Supervisor/User Password item in the BIOS

Main Menu.

A password is only required for entering the BIOS Setup program. (Default)

Setup

A password is required for booting the system and for entering the BIOS Setup program.

System

& HDD S.M.A.R.T. Capability

Enables or disables the S.M.A.R.T. (Self Monitoring and Reporting Technology) capability of your hard

drive. This feature allows your system to report read/write errors of the hard drive and to issue warnings

when a third party hardware monitor utility is installed. (Default: Disabled)

& Away Mode

Enables or disables Away Mode in Windows XP Media Center operating system.

Away Mode allows the system to silently perform unattended tasks while in a low-power mode that appears

off. (Default: Disabled)

& Full Screen LOGO Show

Allows you to determine whether to display the GIGABYTE Logo at system startup. Disabled displays

normal POST message. (Default: Enabled)

& Init Display First

Specifies the first initiation of the monitor display from the installed PCI graphics card or the onboard

graphics.

PCI Slot

Sets the graphics card on the PCI Slot as the first display. (Default)

Sets the onboard graphics as the first display.

Onboard

2-6