Mb Intelligent Tweaker(M.i.t.) - Gigabyte GA-E240N User Manual

2-3

MB Intelligent Tweaker(M.I.T.)

CMOS Setup Utility-Copyright (C) 1984-2012 Award Software
` IGX Configuration
CPU Frequency(MHz)
CPU Host Clock Control
x CPU Host Clock
Set Memory Clock
x Memory Clock
` DRAM Configuration
******** System Voltage Optimized ********
System Voltage Control
x DIMM OverVoltage Control
Normal CPU Vcore
: Move Enter: Select
F5: Previous Values
Whether the system will work stably with the overclock/overvoltage settings you made is dependent
on your overall system configurations. Incorrectly doing overclock/overvoltage may result in damage
to CPU, chipset, or memory and reduce the useful life of these components. This page is for advanced
users only and we recommend you not to alter the default settings to prevent system instability or
other unexpected results. (Inadequately altering the settings may result in system's failure to boot. If
this occurs, clear the CMOS values and reset the board to default values.)
& IGX Configuration
CMOS Setup Utility-Copyright (C) 1984-2012 Award Software
UMA Frame Buffer Size
VGA Core Clock control
x VGA Core Clock(MHz)
: Move Enter: Select
F5: Previous Values
& UMA Frame Buffer Size
Frame buffer size is the total amount of system memory allocated solely for the onboard graphics controller.
MS-DOS, for example, will use only this memory for display. Options are: Auto (default), 256MB, 512MB,
1024MB.
& VGA Core Clock control
Allows you to determine whether to manually set the VGA Core clock. (Default: Auto)
& VGA Core Clock(MHz)
Allows you to set the onboard graphics clock. The adjustable range is from 300 MHz to 2000 MHz. This
item is configurable only if the VGA Core Clock control option is set to Manual.
(Note) This item is present only when you install a CPU that supports this feature.
MB Intelligent Tweaker(M.I.T.)
[Press Enter]
[Normal]
[Auto]
100
[Auto]
x5.33 1066Mhz
[Press Enter]
[Auto]
Auto
1.3000V
+/-/PU/PD: Value F10: Save
F6: Fail-Safe Defaults
IGX Configuration
[Auto]
[Auto]
500
+/-/PU/PD: Value F10: Save
F6: Fail-Safe Defaults
- 23 -
Item Help
Menu Level `
ESC: Exit F1: General Help
F7: Optimized Defaults
Item Help
Menu Level ``
ESC: Exit F1: General Help
F7: Optimized Defaults