Load Fail-Safe Defaults; Load Optimized Defaults - Gigabyte GA-E240N User Manual

& Current Voltage(V) Vcore/DDR15V/+12V/VCC3
Displays the current system voltages.
& Current System/CPU Temperature
Displays current System/CPU temperature.
& Current CPU/SYSTEM FAN Speed (RPM)
Displays current CPU/system fan speed.
& System Smart FAN Control
Enables or disables the system fan speed control function. Enabled allows the system fan to run at different
speed according to the system temperature. If disabled, system fan runs at full speed.
2-9

Load Fail-Safe Defaults

CMOS Setup Utility-Copyright (C) 1984-2012 Award Software
` MB Intelligent Tweaker(M.I.T.)
` Standard CMOS Features
` Advanced BIOS Features
` Integrated Peripherals
` Power Management Setup
` PnP/PCI Configurations
` PC Health Status
ESC: Quit
F8: Q-Flash
Press <Enter> on this item and then press the <Y> key to load the safest BIOS default settings. In case system
instability occurs, you may try to load Fail-Safe defaults, which are the safest and most stable BIOS settings
for the motherboard.

2-10 Load Optimized Defaults

CMOS Setup Utility-Copyright (C) 1984-2012 Award Software
` MB Intelligent Tweaker(M.I.T.)
` Standard CMOS Features
` Advanced BIOS Features
` Integrated Peripherals
` Power Management Setup
` PnP/PCI Configurations
` PC Health Status
ESC: Quit
F8: Q-Flash
Press <Enter> on this item and then press the <Y> key to load the optimal BIOS default settings. The BIOS
defaults settings help the system to operate Always load the Optimized defaults after updating the BIOS or
after clearing the CMOS values.
Load Fail-Safe Defaults
Load Optimized Defaults
Set Supervisor Password
Set User Password
Save & Exit Setup
Load Fail-Safe Defaults (Y/N)? N
Exit Without Saving
: Select Item
F10: Save & Exit Setup
Load Fail-Safe Defaults
Load Fail-Safe Defaults
Load Optimized Defaults
Set Supervisor Password
Set User Password
Save & Exit Setup
Load Optimized Defaults (Y/N)? N
Exit Without Saving
: Select Item
F10: Save & Exit Setup
Load Optimized Defaults
- 33 -
F11: Save CMOS to BIOS
F12: Load CMOS from BIOS
F11: Save CMOS to BIOS
F12: Load CMOS from BIOS