Standard Cmos Features - Gigabyte GA-E240N User Manual

Manual
Table of Contents

Advertisement

2-4

Standard CMOS Features

CMOS Setup Utility-Copyright (C) 1984-2012 Award Software
Date (mm:dd:yy)
Time (hh:mm:ss)
` IDE Channel 0 Master
` IDE Channel 0 Slave
` IDE Channel 1 Master
` IDE Channel 1 Slave
Halt On
Base Memory
Extended Memory
: Move
Enter: Select
F5: Previous Values
& Date (mm:dd:yy)
Sets the system date.
& Time (hh:mm:ss)
Sets the system time.
& IDE Channel 0, 1 Master/Slave
IDE HDD Auto-Detection
Press <Enter> to autodetect the parameters of the SATA device on this channel.
IDE Channel 0, 1 Master/Slave
Configure your STA devices by using one of the two methods below:
• Auto
Lets the BIOS automatically detect SATA devices during the POST. (Default)
If no SATA devices are used, set this item to None so the system will skip the detection
• None
of the device during the POST for faster system startup.
Access Mode
Sets the hard drive access mode. Options are: Auto (default), CHS, LBA, Large.
The following fields display your hard drive specifications. If you wish to enter the parameters manually,
refer to the information on the hard drive.
Approximate capacity of the currently installed hard drive.
Capacity
& Halt On
Allows you to determine whether the system will stop for an error during the POST.
Options are: "All Errors," "No Errors," "All, But Keyboard". (Default)
& Memory
These fields are read-only and are determined by the BIOS POST.
Standard CMOS Features
Tue,
Jul 10 2012
22:31:24
[None]
[None]
[None]
[None]
[All, But Keyboard]
640K
1662M
+/-/PU/PD: Value
F10: Save
F6: Fail-Safe Defaults
- 26 -
Item Help
Menu Level `
ESC: Exit
F1: General Help
F7: Optimized Defaults

Advertisement

Table of Contents
loading

Table of Contents