Power Management Setup - Gigabyte GA-E240N User Manual

Manual

Hide thumbs

Table Of Contents

Table of Contents

& Onboard Audio Function

Enables or disables the onboard audio function. (Default: Enabled)

If you wish to install a 3rd party add-in audio card instead of using the onboard audio, set this item to

Disabled.

& USB Controllers

Enables or disables the integrated USB controller. (Default: Enabled)

Disabled will turn off all of the USB functionalities below.

& USB Legacy Function

Allows USB keyboard to be used in MS-DOS. (Default: Enabled)

& USB Storage Function

Determines whether to detect USB storage devices, including USB flash drives and USB hard drives during

the POST. (Default: Enabled)

& Onboard Serial Port 1

Enables or disables the first serial port and specifies its base I/O address and corresponding interrupt.

Options are: Auto, 3F8/IRQ4 (default), 2F8/IRQ3, 3E8/IRQ4, 2E8/IRQ3, Disabled.

& Onboard Parallel Port

Enables or disables the onboard parallel port (LPT) and specifies its base I/O address and corresponding

interrupt. Options are: 378/IRQ7 (default), 278/IRQ5, 3BC/IRQ7, Disabled.

& Parallel Port Mode

Selects an operating mode for the onboard parallel (LPT) port. Options are: SPP (Standard Parallel Port)

(Default), EPP (Enhanced Parallel Port), ECP (Extended Capabilities Port), ECP+EPP.

& ECP Mode Use DMA

Selects DMA channel for the LPT port in ECP mode. This item is configurable only if Parallel Port Mode

is set to ECP or ECP+EPP mode. Options are: 3 (default), 1.

2-7