Set Command - Sony Handycam CCD-TR2300 Service Manual
Hi8 video camera recorder
Hide thumbs
Also See for Handycam CCD-TR2300:
- Operating instructions manual (100 pages) ,
- Operating instructions manual (98 pages)
Advertisement
To connect
the
camcorder
to
the
Edit
Station
(1) Connect
the power
cord of the supplied
AC power adaptor
to a wall outlet•
(2) Connect
the supplied
connecting
cord to the DC OUT jack on the AC power
adaptor•
(3) Insert
the connecting
plate into the guides
at the bottom
of the Edit Station.
(4) Set the POWER switch
of the camcorder
to OFF.
(5) Aligning
the bottom
of the camcorder
with the arrow mark on the Edit Station,
slide the camcorder
along the guide
until it clicks.
(6) Set the POWER switch
of the camcorder
to VTR.
6
POWER
POWER
II
Iq I m(IFF
I_ll-
I
•
i
#
Caution
Do not set the POWER switch to CAMERA. The Edit Station can be used only for VTR
mode.
To remove the camcorder
(1) Set the POWER switch of the camcorder
to OFF.
(2) While
pressing
HANDYCAM
RELEASE
on the Edit Station,
slide the
eamcorder.
POWER
II
I111 * O_F
You can monitor the playback
picture in the viewfinder.
You can also monitor a picture
on a TV screen, after connecting
the camcorder to a "IV or VCR,
(1) While pressing
the small green button on the POWER switch,
set it to VTR.
The tape transport buttons
light up.
(2) insert
the recorded
tape with the window
facing out.
(3} Press _
to start playback.
To stop playback,
press r-I.
To rewind
the tape,
press
<l<l.
To fast-forward
the tape
rapidly,
press IIH_.
Using
the
remote
commander
You
can control
playback
using
the supplied
Remote
Commander.
Before
using
the
Remote
Commander,
insert
the size AA (R6) batteries.
Using
the
Edit
Station
CCD-TR3300
for
Canadian
model
only
You can control playback
using the buttons and jog dial on the Edit Station, To use the
log dial, turn the shuttle ring clockwise or counterclockwise
to point the desired
indication around the ring. When using the Remote Commander
with the Edit Station,
set COMMAND
MODE on the Edit Station to VTR 2.
To display
the
viewfinder
screen
indicators
on the
TV
Press
DISPLAY
on the Remote
Commander.
To erase
the indicators,
press
DISPLAY
again.
To monitor
the
sound
while
viewing
the
playback
picture
in the
viewfinder
Connect
headphones
(not
supplied)
to the ,Q jack.
i
!
18
19
Advertisement
