Sony Handycam CCD-TR2300 Service Manual page 8
Hi8 video camera recorder
Hide thumbs
Also See for Handycam CCD-TR2300:
- Operating instructions manual (100 pages) ,
- Operating instructions manual (98 pages)
Advertisement
You can use this camcorder as a VCR by connecting it to your TV for playback. There are
some ways to connect the camcorder to your TV. When monitoring
the playback picture
by connecting the camcorder
to your TV, we recommend you to use house current for the
power source.
Connecting
directly
to a VCR/TV with
VideolAudio
input
jacks
If your
TV is already
connected
to a VCR
Open the jack cover and connect the camcorder to the LINE IN inputs on the VCR by
using the supplied
A/V connecting cable. Set the input selector on the VCR to LINE. Set
the TV/VCR selector on the TV to VCR.
If you are going to connect the camcorder
using the S video cable (not supplied)
la], you
do not need to connect the yellow (video) plug of the A/V connecting
cable [b].
If you use a monaural
A/V connecting
cable, you will get monaural
sound.
S-VIDEO IN
AUDIO
IN
r-'-t'N
: Signal flow
If you
connect
directly
to "l_
Open the jack cover and connect the camcorder to the inputs on the TV by using the
supplied A/V connecting
cable. Set the TV/VCR
selector on the TV to VCR.
IN
VIDEO
IN
A_,_a
L DID
IN
:Signal flow
If your
VCR or W
is a monaural
type
Connect only the white plug for audio on both the camcorder and the VCR or the TV.
With this connection, the sound is monaural.
To connect to a VCR or TV without
Video/Audio
input jacks
Use the RFU-95UCadaptor (not supplied).
Connecting
to a VCRITV using the Edit Station
m CCD-TR3300
for Canadian
model
only
Once you connect the supplied
HSA-EC1 Edit Station to your TV or VCR, you can
easily view the picture
on your TV.
If your
W
is already
connected
to a VCR
Connect the Edit Station to the LINE IN inputs
on the VCR by using the supplied
A/V
,'._._.,_
connecting
cable. Set the input selector on the VCR to LINE. Set the TV/VCR selector
on the TV to VCR.
_
If you are going to connect the Edit Station using the S video cable (not supplied)
[a],
you do not need to connect the yellow (video) plug of the A/V connecting
cable [b].
(not supplied)
S-VIDEO IN
[b]
AUDIO
AUDIO
IN
r---t'N
: Signal flow
If you
connect
directly
to W
Connect
the Edit Station to the inputs on the "IV using the supplied
A/V connecting
cable. Set the TV/VCR
selector on the TV to VCR.
--_
-_@_.
(not supplied)
_,!__
_,.._0
VIDEO IN1,,,l'Ir_ I I I I II
[b] AUDIO"-__./-
"N---._AUDIO IN
: Signal flow
If your
VCR or W
is a monaural
type
Connect
only the white plug for audio on both the Edit Station and the TV or VCR.
With this connection,
the sound is monaural.
16
17
Advertisement
