Sony Handycam CCD-TR2300 Service Manual page 34

Scanning the beginning of each marking position - index scan
Use the Remote Commander. To view the picture on a TV, press DISPLAY.
(1) Press INDEX on the Remote Commander during normal playback.
(2) Press _ or I_1_. The tape rewinds or advances rapidly and plays back for
approximately 10 seconds form the point on which the index signal was
marked. If you want to continue playback, press [2>-. When you do not press
any button, the tape is automatically scanned to the next program.
1
r-SEARCH"-1
DATE INDEX
To cancel index scan mode
Press 1>. Normal playback resumes+
2
Locating the desired marking position - index search
(1) Press INDEX on the Remote Commander du_'ing stop or playback mode.
(2) Press INDEX repeatedly until the index number of the desired program is
displayed in the viewfinder.
(3) Press _ or I_1_. Playback starts from the beginning of the desired program.
[a] the current position
[b] the INDEX number
[b] e -_ I ._ I [a] I i,_ t _
e
r-SEARCH--7
DATE INDEX
INDEX O0
SCAN
r-SEARCH_
DATE INDEX
INDEX 02
SEARCH
To stop index search mode
Press [;::>'. N ormal playback resumes.
Note on the Index number
The index number (l, 2, etc.) indicates the distance from the point you are now viewing
[a], regardless of the direction.
t=
68 69