Sony Handycam CCD-TR2300 Service Manual page 14

_,_1111"
A
I,
Before you start recording or during recording, press DATE or TIME. You can record
the date or time displayed in the viewfinder with the picture. You cannot record the
date and time at the same time. Except for the date or time indicator, no indicator in the
viewfinder is recorded.
The clock is set to East Coast Standard Time at the factory. You can reset the clock in the
menu system.
DATE
JUL. 4 1996
TIME
5:30:OOPM
You can fade in or out to give your recording a professional appearance.
When fading in, the picture gradually fades in from black or mosaic while the sound
increases. When fading out, the picture gradually fades to black or mosaic while the
sound decreases.
When fading in [a]
(1) While the camcorder is in Standby mode, press FADER/OVERLAP (only for
CCD-TR3300), or FADER (only for CCD-TR2300). The fade indicator starts
flashing.
(2) Press START/STOP to start recording. The fade indicator stops flashing.
When fading out [b]
(1) During recording, press FADER/OVERLAP (only for CCD-TR3300), or
FADER (only for CCD-TR2300). The fade indicator starts flashing.
(2) Press START/STOP to stop recording. The fade indicator stops flashing, and
then recording stops.
+m mm ,.,..&
FADER
M.FADER
To stop recording with the date or time
Press DATE or TIME again. The date or time indicator disappears. The recording
continues.
Note on the date or time indicator
If you press DATE or TIME while you are recording in CINEMA mode, the indicators
in the viewfinder move upwards.
-,,d
[b] II;t ii;-
CCD,-TR3300
FADE_OVER_PI'_'_' _"
| _M.FADER - 1
xlllllll_
i
_E C{ _OVERLAP- I
1111!!!, %
LJ L__] _...... {
I _ [ _WIPE - t
Note on fade indicator
-- CCD-TR2300 only
Each time you press FADER, the fade indicator changes: FADER --* M.FADER --* no
indicator, cyclically.
o
o
,a
28
29