Sony Handycam CCD-TR2300 Service Manual page 21

• .
You can select one of eight preset titles. You can also select the language, position, and
color of titles in the menu system.
Seleding the language
(1) While the camcorder is in Standby mode, press MENU to display the menu.
(2) Turn the control dial to select TITLE LANG, then press the dial.
(3) Turn the control dial to select the desired language, then press the dial.
(4) Press MENU to erase the menu display.
MENU
4,
m
oAc To s_r
REC
E_uls_ tlttE uAn_ POAt_GU_S
_ n'rtE _
IMINu I : E_40
i _
Using titles
To add the title from the beginning
(1) While the camcorder is in Standby mode, press TITLE repeatedly until the
desired tit]e appears.
Each time a new title appears, it flashes. When the desired title appears, wait
for it to stop flashing.
Titles cycle as follows.
Original title 1 _ Original title 2 _ HELLO! _ HAPPY BIRTHDAY --_
HAPPY HOLIDAYS _ CONGRATURATIONS! _ OUR SWEET BABY ---*.
WEDDING _ VACATION ---* THE END
After "THE END" the title indicator goes off once and returns to Original title
I again.
The titles are displayed in the language you selected in the menu system.
(2) Press START/STOP to start recording.
(3) When you want to stop recording the title, press TITLE again.
• Note on titles
The contents and the order of titles are different depending on the languages
If you have not stored any original titles
The titles begin from "HELLO!".
To add the title while you are recording
(1) While in Standby mode, press TITLE repeatedly until the desired title appears
to cycle through the titles.
Each time a new title appears, it flashes•
(2) When the desired title appears, wait for it to stop flashing, and press TITLE
again to erase the title from the display.
(3) Start recording.
(4) When you reach the point where you want to add the title, press TITLE.
(5) When you want to stop recording the title, press TITLE again.
>
O
i
42 43