Sony Handycam CCD-TR2300 Service Manual page 17

A
(1) Press PICTURE EFFECT.
(2) Turn the control dial to select the desired picture effect mode.
PICTURE
] MOSAIC ]
I I
o,w I
L_SLIM ,
_L STRETCH
To turn off picture effect
Press PICTURE EFFECT to highlight the picture effect indicator, and press the button
again. The indicator in the viewfinder goes out.
Note on the picture effect
When you turn the power off, the camcorder returns automatically to normal mode.
You can record a still picture like those of still camera or shoot a moving picture with
superimposing a still picture while the sound is recorded normally.
(1) Press DIGITAL EFFECT and turn the control dial to select the still indicator.
(2) Press the control dial to select still mode.
The still indicator and still bars appear in the viewfinder, and still picture is
stored in memory.
(3) Turn the control dial to adjust the rate of the still picture you want to
superimpose on a moving picture.
The rate of the still picture increases by the number of the still bars.
(4) Press START/STOP to start recording a moving picture with a still picture
superimpose on. When you stop recording, press START/STOP again.
1 OIGITAL STILL 1111111 /
1
To cancel still mode
Press DIGITAL EFFECT to highlight the still indicator, and press the button again. The
still indicator in the viewfinder disappears.
Notes on still mode
• You cannot use the following functions while recording a still picture.
- Fade-in or fade-out
- Mosaic fader
- Overlap
- Wipe
- Slow shutter
• When you turn the power off, still mode will be cancelled automatically.
>
==
D=
o
=0
34 35