A Scene Using The Zero Set - Sony Digital8 DCR-TRV120 Operating Instructions Manual

Quickly locating a scene using the zero
set memory function
Your camcorder goes forward or backward
to automatically stop
at a desired scene
having a counter wdue of' 0:00:00". Use the Remote Commander fur this operation.
Use this f\mction, for example, to view a desired scene later Oilduring playback.
(1) In the playback mode, press DISPLAY.
(2) Press ZERO SET MEMORY at the point you want to locate later. Tile counter
shows "0:00:00" and the ZERO SET MEMORY indicator flashes.
(3) Press • when you want to stop playback.
(4) Press _ to rewind the tape to the counter's zero point. Tile tape stops
automatically when the counter reaches approximately zero. The ZERO SET
MEMORY indicator disappears and the time code appears.
(5) Press I_. Playback starts fi'om the counter's zero point.
DISPLAY
ZERO SET MEMORY
Notes
• The zero set memory flmrtion works only fbr tapes recorded in the Digital8 [) systen-l.
• When you press ZERO SET MEMORY befbre rewinding tile tape, the zero set memory
flmction will be canceled.
• There may be a discrepancy of several seconds fi'om tile time code.
Ira tape has a blank portion in the recorded portions
The zero set n-len-lory fnnrtion may not work correctly.
ZERO SET MEMORY functions also in the standby mode
When you insert a scene in the middle of a recorded tape, press ZERO SET MEMORY at
the point you want to end tile insertion. Rewind the tape to tile insert start point, and
strut recording. Recording stops automatically at tile tape counter zero point. Your
camcorder returns to tile standby mode.
52