Sony Handycam HDR-FX1 Operating Instructions Manual page 82

• Analog signals aie not output from file
COMPONENT OUTPUT jack
1 Turn on the analog device.
2 Set the POWER switch to VCR.
Use the AC Adaptor (supplied) as the
power source.
Press MEN[.
4 Select the _ (IN/OUT REC) menu
by turning the SEL/PUSH EXEC dial,
then press the dial.
5 Select [A/V --_ DV OUT] by turning
the SEL/PUSH EXEC dial, then press
the dial.
6 Select [ON] by turning the SEL/PUSH
EXEC dial, then press the dial.
7 Press MENU to hide the menu screen.
Start playback on the analog device.
Start importing on the computer.
Refer to the manual supplied with the
program software or its on-line help for
details.
After importingthe picture and sound
Stop importing on the computer, and stop
playback on the analog device
Note
• Yore camcorder may not be able to ouiput tlle si_lal
to the computer conectly depending on the video
signal input to yore camcorder.
• You cannot import pictures that have been recorded
using a copyright protection signal to a computer via
your canlcorder
82 Dubbing/Editing