Sony Handycam HDR-FX1 Operating Instructions Manual page 12

5 Set the POWER switch to OFF (CHG).
The (HG (charge) lamp lights tip and
charging starts.
Tocheckthe remainingbattery
i
Battery
Info
DISPLAY/
BATI INFO
Afterchargingthe battery
The CHG (charge) lamp turns off when the
batterv is flllly charged. Disconnect the AC
Adaptor from the DC IN jack.
To remove the battery pack
1
Set the POWER switch to OFF (CHG).
2
Press BATT RELEASE and slide the
battery pack up.
You can check the battery' s current charge level
and its current remaining recording time both
during charging or when the power is turned oft'.
The remaining recording time in the selected
recording lbrmat appears.
1
Set the PO%¥ER switch to OFF (CHG).
2 Open the LCD panel and adjust the
angle.
3 Press DISPLAY/BATT INFO.
The batter?- intbrmation appears for about
7 seconds.
Keep the button pressed to view it for about
20 seconds.
BATTERY INFO
BATTERY CHARGE LEVEL
REC TIME AVAILABLE
LCD SCREEN:
VIEWFtNDER:
[] Battery charge level: Displays
approximate remaining amount of
power left in the battery pack.
[] Possible recording time using the LCD
panel.
[] Possible recording time using the
viewfinder.
12 Getting
started