Sony Handycam HDR-FX1 Operating Instructions Manual page 61

• Disconnect the iLINK cable before setting [i.LINK CONV]. Otherwise, the connected
video device may not be able to recognize tile video si_lal flom this camcorder.
You need to convert the signal depending on the TV connected.
l>16:9 Select to view yore pictmes on a 16:9 wide TV.
The recorded pictmes will appear as follows:
When HDV pictures When DV pictures
are pIayed back are played back
@ I@1
4:3
Select to view your pictmes on a 4:3 standard TV.
The recorded pictmes will appear as follows:
When HDV pictures When DV pictures
are ptayed back are played back
@
"_° Tip
• When you view pictures recorded with [DV WIDE RE('] on the (CAMERA SET)
metal set to [ON] on a 4:3 standard TV, pictmes may appear as they are in height, but are
compressed in width @ending on the TV. If you view the recorded pictures on such type
of 4:3 standard IN', set [DV WIDE REC] to [OFF] before recording.
m
e-
c
You can connect a digital device and an analog device to your camcorder and
convert the signal transmitted from the connected devices to the appropriate signal
on yonr camcorder.
1>OFF Select when you are not using the Signal conversion flmction.
ON (_) To output analog images and sound in digital tbrmat using your
camcorder.
The analog signal input to the AUDIO/VIDEO jack of yore camcorda
will be converted and output from the i.LINK Interface of _ur
camcorder.
For details, see page 81.
Using the Menu 61