Sony Handycam HDR-FX1 Operating Instructions Manual page 64

I>AUTO Select to display the remaining tape indicator for about 8 seconds:
• After you set the POWER switch to CAMERA or VCR with a
cassette inse_ted, and your camcorder calculates the remaining
amount of tape.
• After you press _ (play) or DISPLAYiBATT INFO.
QN Select to always display the remaining tape indicator.
I>LC D PAN E L Select to show indicalors such as the time code on the LCD screen and
in the viewfinder.
V-O UT/PAN EL Select to show indicators such as the time code on the TV screen, LCD
screen, and in the viewfinder.
Note
• You cannot input a signal to _m- camcolder if you press DISPLAY/BATT INFO while
[V-OUT/PANEL] is selected.
I>ON Select when using the Remote Commander supplied with your
canlcorder.
OFF Select to deacti;_ate the Remote Commander to prevent your
camcorder from responding to a command sent by another VCR
remote control unit
Note
• The setting rentals to [ON] when you have the power source disconnected from yore
camcordei t)r more than 5 minutes.
64
Using the Menu