Select this setting to set the transition
duration and time. See page 37 for details
on using the shot transition
function.
TRANSTIME
Select the time that takes to make a transition
from the current setting to the
selected setting.
DtLration from [2.0 sec] through [15.0 sec] are available.
It is set to [4.0 sec] in the
defauh setting.
TRANSCURVE
Select the transition
cnrve.
The figures below show the transition
curve of each mode.
*1 : parameter
level
*2: transition
of time
LINEAR
_SOFTSTOP
SOFTTRANS
Select to make the transition
linearly.
/
/
/
/
*2
Select to make the transition
slowly at the end
"1
/
*2
Select to make the transition
slowly at the
beginning
and end, and linearly in between.
/
//
*2
fO Note
• Betb_e setting [SHOT TRANS]
nml off all of the STORE'CHECK,'EXEC
lamps by
pressing
the button repeatedly
(p 37).
m
r--
c
=bcontinued
Using the Menu
53