Sony Handycam HDR-FX1 Operating Instructions Manual page 54

t>ON Select to activate the Stea@Shot fimction. You can select the type of
the SteadyShot fimction in [STDYSHOT TYP].
OFF ( '_2 ) Select to deactivate the SteadyShot fimction. Select when recording
using a tripod More natural pictures are produced
You can also deactivate the Stea@Shot fimction by using the
ASSIGN button assigned to the Stea@Shot fimction (p 68)
0 Note
• The SteadyShot fimction does not work well when a wide convelsion lens othe! than VCL-
HG0872 (optional) is attached to your camcorder.
• When using VCL-HG0872, select [WIDE CONV.] in [STDYSHOT TYP] below.
You can select the type of the SteadyShot function that compensates l)r camera-
shake. To release the SteadyShot function, select [OFF] in [STEADYSHOT] or
use the ASSIGN button assigned to the SteadyShot function (p. 68).
HARD Select to activate the Stea@Shot fimction with stronger efl)ct. This
mode is not recommended tbr recording with camera panning
technique.
t>STANDARD Select to activate the standard SteadyShot fimction.
SOFT Select to activate the Stea@Shot fimction so that it leaves a slight
unsteadiness on tlle picture so the picnn-e looks natural.
WIDE CONV. Select when a wide conversion lens (optional) is attached This mode
is the most effective with Son?, VCL-HG0872 wide conversion lens.
t>O N Select to record under normal conditions. Flickering of the screen
under a light source such as fluorescent lamps will be re&_ced.
OFF Select when you do not want to reduce flickering of the screen.
0 Note
• Flickering may not be reduced depending on the light somce.
Select this item to set the zoom speed of position H and L of the handle zoom
switch (p. 22).
1
Select [H] or [L] by turning the SEL/P[ SH EXEC dial, then press the
dial.
2 Select a zoom speed by turning the SEL/P[ SH EXEC dial, then press the
dial.
54
Using the Menu