Tape - Sony Handycam HDR-FX1 Operating Instructions Manual

Dubbing/Editing
Dubbingto another
tape
You can copy a picture played back on your
camcorder to other recording devices (such
as VCRs).
Connect your camcorder to a VCR as shown
in the following illustration.
To dubto an HDV compatibledevice
( onnect your camcorder to an HDV compatible
device using an i.LINK cable (optional).
Player
Recorder
i.LIN_caNe (optional)
_, HDV/DV jack
Signal flow
To select the video format to be dubbed
The video lbrmat to be dubbed depends on the
settings of [VCR HDViDV] and [i.LINK
CONV] on the _ (IN/OUT RE() menu.
Beibre setting these menu items, disconnect the
i.LINK cable.
• Pictures will be dubbed in the recorded format
when [V(R HDViDV] is set to [AUTO] and
[i.LINK (ONV] is set to [OFF[.
• Pictures, including those recorded in the HDV
fomlat, will be dubbed in the DV lbnnat when
[VCR HDViDV] is set to [AUTO], and
[i.LINK CONV] is set to [ON].
• Only pictures in the selected lbrmat will be
dnbbed when [VCR HDViDV] is set to
[HDV] or [DV]. Other pictures will be dubbed
as blank portions, so neither picture nor sound
will be dubbed.
_, HDV/DV Jack
0 Note
• Ifyou change the settings of [VCR HDV,'DV[ and
[iilNK CONW[ with the i.LINK cable connected,
the video device may not be able to recognize the
video simml from the camcorder at the time of
dubbing.
• When [VCR HDViDV] is set to [AUTO] and the
signal switches between HDV and DV, the picture
and sound disappear temporarily.
• When the recorder is an HDR-FX1, set [VCR HDVi
DV] on the ?_. (IN/OUT REC) menu to [AUTO]
on the recording HDR-FX1 (p 74)
70 Dubbing/Editing