Sony Handycam HDR-HC3 Operating Manual page 96

Digital hd video camera recorder
Hide thumbs Also See for Handycam HDR-HC3:
Table of Contents

Advertisement

TrssNsshsstisS/gsstisssS}
The
data file name
flashes.
• The file is damaged.
• The file format is not supported
on your camcorder
(p. 114).
Refer
also to "Adjusting
the image
during
recording"/p.
97) and "Memory
Stick Duo" section
(p. 95).
The
tape does
not start
when
you
press
START/STOP.
• Slide the POWER
s_itch
to turn on the CAMERA-TAPE
lamp (p. 311).
• The tape has reached the end. Rewind
it, or insert a new cassette.
• Set the write-protect
tab to REC or insert a new cassette
(p. 112).
• The tape is stuck to the drum due to moisture
condensation.
Remove
the cassette
and leave
your camcorder
R)r at least I hour, then re-insert
the cassette
(p. I 19).
You cannot record on the "Memory
Stick Duo."
• Rch:asc the lock on the write-protect tab of the Memory Stick Duo" if there is one (p. 114).
• The "Memory Stick Duo" is fillh Delete unnecessa U pictures recorded on the "Memory Stick
Duo" (p. 80).
• Format the "Memory Stick Duo" on your camcorder or insert another "Memory Stick Duo"
(p. 60).
• You cannot record movies with this unit on the _Memory Stick Duo."
• When the POWER switch is set to CAMERA-TAPE, you cannot record still images on the
'Memory Stick Duo" with:
[PICT.EFFECT]
[D.EFFECT]
While executing [FADER]
[SMTH SLW REC]
The recording angle differs depending on the POWER switch setting position.
• The recording angle x_hen the POWER sx_itch is set to CAMERA-MEMORY is _xider than
when it is set to CAMERA-TAPE.
You cannot record a smooth transition on a tape from the last recorded
scene
to the next.
• Perlkmn END SEARCH (p. 39).
• Do not remove the cassette (The picture will be recorded continuously _ithout a break even
when you turn the power off).
• Do not record pictures in the HDV and DV formats on the same tape.
• Do not record pictures in SP mode and LP mode on the same tape. DV
• Avoid stopping then recording a movie in the LP mode. DV
• When [QUICK REC] is set to ION], you cannot record a smooth transition (p. 711).
H DV1080{
g6

Advertisement

Table of Contents
loading

Table of Contents