Sony Handycam HDR-HC3 Operating Manual page 68

_A $Tg_DAR# SETmenu/Co_ti_ueg}
68
Signals in HDV format are converted tu DV
format, and pictures are output in DV
format from tile [, HDV/DV htterface
/i.LINK).
P,"OFF
Outputs the pictures lron_ the _, HDV/DV
Interface (i.LINK) in accordance with the
settings in [REC FORMAT[ and [VCR
HDV/DV].
ON (HDV --* DV)
Picuues ill HDV lbrmat are con'_ ertcd to
DV lbrmat, and pictures in DV lbrmat are
output in DV lbrmat.
• For input signal via an bLINK connection, see
[VCR HDV/DV] (p, 65).
• Disconnect the i.LINK cable belore setting
[i.LINK CONV]. Otherwise, the connected
video device may not be able to recognize tile
video siglla] II'Olll your camcorder,
Yuu need to cunvert the signal depending
()it the TV connected when playing back the
picture. The recorded pictures are played
back as lklllowiug illustratiuus.
_.16:9
Seh:ct to vie_ your pictures on a 16:9
lwide) TV.
HDV/DV (16:9)
format pictures
@
DV (4:3) format
pictures
4:3
Select to vie_ your pictures on a 4:3
standard TV.
HDV/DV (16:9) DV (4:3) format
format pictures pictures
• When you connect yollr camcorder to a TV
compatible with the ID-I system, or via an S
VIDEO jack, and play back the tape, set [TV
TYPEI to [16:91. The TV automatically
switches the aspect ratio according to tile
playback picture. Reler also to tile manual
supplied wilh your TV.
See page 21.
You can check the setup value of the
following items.
[COMPONENT] (p. 67)
[i.LINK CONV] (p. 68)
[TV TYPE] (p. 68)
HDMI OUTPUT (p. 83)
[VCR HDV/DV I (when the POWER switch is
set to PLAY/EDIT) (p. 65)
Yuu can display the frame and check that
the subject is horizuntal or vertical by
setting [GUIDEFRAME] to tONI.
The frame is not recorded. Press DISP/
BATT INFO tu make the frame disappear.
• Pointing tile subject at the cross point of the
guide fiame makes a balanced composition.
During playback, displays the informatiun
]data code) recorded automatically at the
time of recording.