Printout Problems
Printout is garbled
Cause
The interface cable may not be
plugged in securely.
You may not be using the
correct interface cable.
Note:
If a status sheet does not print correctly, your printer may be damaged. Contact
your dealer or a qualified service representative.
Misalignment of colors
Cause
The registration position of
each color may have shifted
while the printer was being
shipped or moved to a new
location.
232
Troubleshooting
What to do
Make sure that both ends of the
interface cable are plugged in securely.
If you are using the USB interface, use a
Revision 2.0 cable.
What to do
Check the color registration and adjust
the alignment if necessary. See
"Checking color registration" on page
208 for instructions.